Roof Rebedding Perth
Reset Your Ridge Capping the Right Way
If your roof’s ridge caps are loose, cracked, or sliding out of place, repointing alone won’t cut it.
That’s where roof rebedding comes in.
At Roof Restoration Perth, we’ve been rebedding roofs across WA for over 40 years. We strip out the crumbling base beneath your ridge caps and replace it with fresh bedding that locks everything in place — so your roof stays solid and leak-free for years.

1) Roof Assessment & Report
We jump up on your roof and check the condition of the ridge caps, bedding, pointing, tiles, and drainage. You’ll get clear photos and a quote with zero sales pressure.
2) Remove Old Bedding
We carefully lift the ridge caps and scrape out the old, brittle mortar underneath. We don’t just skim over the top. We remove all of it to ensure a clean base.
3) Lay New Bedding Mortar
Using high-strength bedding cement, we re-set each ridge cap into perfect position. The new mortar is shaped to hold the capping firmly and direct water flow correctly.
4) Let It Cure & Set
Once bedding is complete, we let it fully cure. No rushing it. Solid bedding is the backbone of a durable ridge and we do it right the first time.
5) Finish with Flexible Pointing
After the bedding sets, we apply flexible pointing compound over the joints to lock it all down. This layer seals out water and handles movement without cracking.


